|
Products -
Fiber optic
|
|
Extender consists of a RX-31HD – optical receiver,TX-31HD – optical transmitter.
HD/SD-SDI over Optical Fiber Extender up to 10km over single mode fiber(operating distance is approximate).
This extender is an ideal and economic solution designed for transmission of multi-rate SDI video, with embedded audio and metadata over a single mode optical fiber cable.
The transmitter module receives one HD/SD-SDI electrical input, perfectly converts SMPTE 292M, SMPTE 259M, or DVB-ASI electrical SDI signal to optic SDI signals. The receiver module receives optical signal from input SC connector, and then perfectly converts it to electrical SDI signal. Both transmitter and receiver provide equalizing and re-clocking at input unit in order to re-construct the signal for consistent quality.
The TX-31HD transmitter are class 1 laser products.
Features: - Enables transmission of digital video signal over optic fiber up to 10km,
- Standard SC-type fiber optic connector (single mode)
- Supports following protocols:
- SMPTE 259M (143Mbps,270Mbps),
- SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps),
- DVB ASI (270Mbps),
- Automatic reclocked,
- Cable equalization,
- HD/SD-SDI Input signal detection LED.
Specifications: Input connector:
Transmitter: 1x 75Ω BNC SDI
Receiver: 1x Optical SC
Output connector:
Transmitter: 1x Optical SC
Receiver: 2x 75Ω BNC SDI
SDI signal type: SMPTE-292M, SMPTE-259M, DVB-ASI
Fiber optic: Wavelength: 1310 nm(1550nm)
Type: Single-mode
Optical power Better than -7 dBm
Data rates: 1485 / 1483 / 270 /143Mbps
Cable equalization: up to 300m/1000ft for 270 Mbps; up to 150m/500ft for 1.485 Gbps
Automatic detection: 143Mbps / 270Mbps / 1.483Gbps / 1.485Gbps
Power supply: 9-12V,1A DC
Dimensions: 105mm x 80mm x 25mm (L x W x H) |
Fiber optic 
